Tuesday, July 24, 2012

How to Minimize Scratches on Wood Flooring


Hardwood flooring is a big attraction to many home owners and buyers. You will find if you watch a lot of the home TV shows, many home buyers will require hardwood flooring for their purchase. This is because hardwood flooring is not only timeless, but also sleek and easy to keep clean. A key to keeping those hardwoods looking great, is to make sure to keep them free of scratches and shiny and new.

One way to help keep the hardwood flooring looking great is to take steps to prevent scratches in the first place. This is done by making sure to not move furniture along the flooring, do not walk on the floors in high-heeled shoes, and to make sure to keep dogs and other pets claws clipped and short as to not scratch the wood. If moving furniture, make sure to pick the pieces up from the floor. If you wear high-heeled shoes, make sure to take them off at the door. Finally, if you have indoor pets, make sure to keep their claws clipped and smooth at all times.

If you happen to find a scratch the first step would be to minimize it as best as possible. You can do by this lightly rubbing the scratch with fine steel wool. Make sure to rub with the grain of wood, and not against it. If it is a deeper scratch you may want to try lightweight sandpaper on the scratch. Again, make sure to rub with the grain of wood as to not cause further damage.

After you have buffed out the scratches, you want to rub some mineral spirits over the area. This will smooth out the scratch and you pick up any of the fine dust from using the fine steel wool or lightweight sandpaper.

Next you simply want to fill the scratch with a premixed wood filler. While using a putty knife, you want to fill the scratch with the filler. Try to find a filler that is the same shade as your flooring. Once the filler has tried you simply want to go over the scratch with a lightweight sandpaper. This is for getting rid of any excess sand filler. That is all you want to remove in this step.

The last step to fixing any minor scratches is to refinish the sanded area with a varnish, polyurethane or other sealant product. In this step you want to use a lambswool applicator as to not create any air bubbles in the finish.


Article Source: http://EzineArticles.com/7182603

No comments:

Post a Comment