Friday, December 31, 2010

12 Types Of Carpet


The carpet market is a huge market, with lots of types to select from. Here are 12 different types of carpet and what they will offer you and your home.

Woven

Woven carpet is produced on a loom that is very similar to woven cloth, being cut pile. There are numerous different colored yarns being used and the whole process is capable of producing very intricate patterns from designs that are pre-determined. Generally, woven is the highest quality of carpet available.

Tufted

This type of carpet is produced on a tufting machine by using either a single colored or sometimes a non colored yarn. If non colored is being used, then the carpet will be dyed or printed with a design as a separate process. Carpets that are tufted can either be cut pile, loop pile, or a combination of both. Machines can produce a lot more meters of carpet than weaving, and they are usually at the lower end of the market.

Needlefelt

The needlefelt type of carpet is a bit more technologically advanced. They are produced by electrostatic attraction of individual fibers that form a unique carpet with extremely high durability. You can normally find needlefelt carpet in the contract market such as in hotels or other places where there is always going to be a lot of traffic.

Flatweave

The flatweave carpet is created by interlocking warp and weft threads. The types of oriental flatwoven carpet include soumak, plain weave, and tapestry weave. This type is not well known in the North American region, although it is very popular in the orient and Japan.

Hooked rug

This is a simple construction of rug that is handmade by pulling strips of cloth such as wool or cotton through the meshes of a very sturdy fabric. Now, this type of rug is generally known as a handicraft.

Knotted pile

With knotted pile carpets, the structural weft threads will alternate with a supplementary weft that will rise from the surface of the weave at a perpendicular angle.

Cut and loop piles

The cut and loop pile combines both looped and cut fibers. They provide a variety of surface textures for medium durability. Cut and loop carpets are available in either solid or different colors. The several different layers in this carpet can hide dirt and footprints in formal and informal areas.

Saxony

Saxony consists of tightly twisted cut piles that are heat set straight. They consist of two or more fibers that have been twisted together in a yarn, and they provide a very soft texture for informal as well as formal areas. They will show each and every footprint and even marks from vacuum cleaners.

Textured saxony

Textured carpet is the best selling and it works well in informal areas due to the very soft feel. They are tightly twisted and texture headset for medium durability. They also offer a multi colored look that will hide tracks and footprints.

Plush/velvet

Both plush and velvet are lightly twisted and offer a uniform color. They are very soft and offer more level than textures. This type of carpet is ideal for formal areas due to it's luxurious appearance.

Frieze

Frieze is a highly twisted cut pile type of carpet that is suited for high traffic areas. It has short fibers that will tend to curl in different directions at the surface to hide footprints and vacuum marks.

Level loop pile

The level loop pile is constructed by weaving even loops of yarn into carpet backing at both ends. This type of carpet is durable as well as track resistant, due to the strong loops. Higher loops in the carpet will create a more luxurious look. They are also great because they will prevent dirt from filtering on into the carpet.

Article Source: http://EzineArticles.com/?expert=Alex_Fir

Wednesday, December 29, 2010

Hardwood Flooring Options Can Fit All Budgets


Hardwood flooring options are very popular with homeowners today because of the versatile nature of these beautiful wooden floors. Floor woods come in many wonderful colors, thicknesses, and grains that allow all homeowners to choose an appropriate room appearance to match their unique architectural requirements. Homeowners can use light or dark woods, various grains, and their natural interior elements to pre-set the mood of each room that utilizes these high-quality flooring materials.

Wooden floors can be budget-friendly options for all homeowners to consider:

Costs: Floors that are made from wood are not always a high-end expense. Today, with modern technologies, hardwood floors come in a wide variety of prices that can fit into all types of budget requirements. Solid wood floorboards are cut into various thicknesses that can influence flooring price. There are solid wood floors, and floors that are made with a strong layering process that has a solid wood veneer on the top surface. Hardwood imitations are also available that appear to be stunning solid hardwood floors.

Woods: It is possible to choose floors that have been made from traditional woods like oak, pine, or maple. Each one of these woods comes in more than one shade so that it is possible for homeowners to find just the right hue to enhance their overall interior design goals. Flooring woods also come in elegant choices like cherry, ash, or mahogany that are very popular choices in many new homes today. Elegant floors are often chosen in a wood-tone that highlights favorite furnishings, doorway trims, or the cabinetry in a kitchen or bathroom area.

Widths: When hardwood flooring is installed, the width of the boards, the pattern that the boards are laid into, and the way that the boards meet the walls are all points to consider when you are deciding upon a wooden floor design. Traditional wooden floor widths will normally run about 2.25" to 4" across. Plank-width boards are those that are larger than 4" across. Larger floorboards can often lend a comfortable feel to kitchens, game rooms, and other interior places that are used for leisure activities.

Patterns: The direction that floorboards are laid can trick the eyes into believing that a room is larger or smaller in size. Wooden floors can end at a wall, or decorative trims can be installed over the ends of the boards to add a polished appearance to the room. Inlaid patterns, wooden mosaic floors, and parquet floors are all possible to obtain with modern hardwood flooring options. Modern wood floors come in gloss, semi-gloss, and matte or hand rubbed finishes that can also be used in floor patterning projects.

While choosing your new hardwood flooring materials, sizes, and room patterns, it is always helpful to have a professional involved in your choices so that you are aware of the options that will fit your lifestyle, room designs, and purpose. Beautiful wooden floors come in water-resistant versions, easy-care fashions, and natural wooden finishes. There are wooden floors that are perfect for every home, office, and business location. Hardwood floors are long-term flooring options that are desirable interior elements.

Article Source: http://EzineArticles.com/?expert=Charlie_Dima

Monday, December 27, 2010

What You Need To Know Before Installing Hardwood Floors


When it comes to home renovation and décor, natural furnishings seem to do the trick. They are naturally beautiful and are highly durable. Talking about natural furnishing wood is the best choice we always make in order to pamper up our home beauty. People all over the word use hardwood an after-product of wood to decorate their floors or even to make the room comfortable. But, they are more reserved in the installation of hardwood floors for the whole house as they know without proper maintenance of the wood it might rot or break.

All the rumors related to hardwood floors can be easily ignored if proper maintenance can be provided. In the market there are mainly two sorts of hardwood planks, which are finished and prefinished. The finished planks are more durable and at most times they are laminated with a protection layer. On the other hand, the prefinished planks are not usually protected with any final layer but they can easily be by setting it up in the proper manner. Before you start the installation of hardwood floors , the first work will be to store the hardwoods within the room for a few days as such the hardwood gets adjusted with the indoor humidity level.

After a few days of pre-installation warm up, the next step towards installing hardwood floors will be to cover the floor with asphalt by overlapping seams by about 2-3 inch. Set the asphalt to the floor using a staple gun. Use a measuring tape and a chalk to find out an accurate center line so that a straight line can be maintained. Then use another chalk to draw a second line with respect to the centerline with a gap of ½ inch assuch to allow allowing a.5 inch space for expansion. The next step will be to apply the hardwoods planks. For doing this the first thing to do is to apply the longest slaps at the corner as to cover the used nails by a base shoe or any sort of molding. For the second and every row of the flooring while pinning up the planks put the nails in a 45-50 degrees angle after every 10 inch of the plank. Before putting in every new rows of plank put a hard tap at the adjacent rows from the side to make it more compact. But, at times when using wider planks try to keep a gap for any expansion. At the end when you reach the final row, use a bock and a pry bar to set the last row tightly in the correct position. The whole layering should be done following the chalk marks as to maintain a uniformity and straightness. This is how you can use wood planks to install a hardwood floor.

The whole process is not that hard, but if the steps seems to get complex then it would be advised to hire a specialized for assistance. If somehow the flooring seems to change the level with the adjoining rooms, try installing a reducer strips for a smooth transition.

Article Source: http://EzineArticles.com/?expert=Jeremy_Lieber

Saturday, December 25, 2010

Hardwood Flooring: Perfect Combination of Appearance, Versatility, and Cost


Hardwood flooring has characteristics that make it a popular choice for both aesthetic and practical reasons.

From the aesthetic viewpoint, real wood flooring provides more choices when it comes to décor matching than any other type of material. The many available species of hardwood, combined with the ability to machine the wood into different configurations, plank or parquet for example, and to add to that various finish colors and different degrees of top finishes, provides practically infinite choices. Hardwood flooring can complement and enhance any decor or environment where it is used.

Hardwood flooring is practical, too. Carpet, with luck, might offer a life span of twenty years before it wears out, frays, or becomes so stained, discolored, or faded that it can no longer be tolerated. Concrete will outlast carpet, but requires extensive routine maintenance, and eventually costly complete replacement. Resilient and vinyl flooring, tile or sheet-style, do not even belong in this discussion. Even neglected or abused hardwood flooring could easily last a hundred years, and restoring a floor of this age is simply a matter of sanding and refinishing.

Realwood flooring is generally of two main types: Solid or Engineered. The difference between the two is that a solid wood is one species from the surface to the bottom, while an engineered hardwood flooring uses less expensive woods and wood by-products to form the substrate, or base layers, then finished with a layer (veneer) of the desired species on the top. Each has it strong points, and either will perform beautifully; the choice is mainly one of personal preferences, structural considerations, and economics.

There are about a dozen commonly used wood species that are abundantly available and are capable of being replenished through re-growth. Oak is by far the most popular choice. Its combination of durability, beauty, and adaptability to a wide range of applications account for this. Walnut, Ash, and Beech are also popular species. Next are species that while not necessarily rare, are slightly less versatile than the others. This would include Birch, Cherry, and Maple. Finally, there are exotic species such as Jarrah and Merbau that are somewhat costly due to a limited supply.

Both types, solid and engineered, and all species, can be obtained and used either unfinished, finished after installation, or can be purchased already finished. Stains can be used to achieve a desired color, and various top coats can be used depending on whether a shiny or matt-like final effect is desired.

Oil or water based lacquer and polyurethane are commonly used as top coats. These make routine maintenance a simple case of using a dust mop or vacuum to pick up loose debris, and an occasional damp mopping for spills, which is one of the primary reasons for real wood flooring's ongoing popularity.

Article Source: http://EzineArticles.com/?expert=Naresh_Shah

Friday, December 24, 2010

Professional Carpet Cleaning Tips : Drying Carpet After Cleaning


Watch as a seasoned expert demonstrates how to dry carpet after cleaning it in this free online video about professional carpet care.

Tuesday, December 14, 2010

Green Products Expo 2009


New York House magazine takes a first hand look at what's new in green tastes, trends, and technology for 2009.

Wednesday, December 8, 2010

Housecleaning Tips : How to Clean & Shine Hardwood Floors


Vinegar and water can be used to clean hardwood floors without leaving spots, as vinegar evaporates quickly. Discover how to use a drop of oil in a cleaning rag to shine hardwood floors with help from a professional house cleaner in this free video on hardwood floors housecleaning tips.

Monday, December 6, 2010

Clean Rooms Need Extra Special Flooring


Most companies who deal with sensitive products have to have a specialized environment where no dirt or dust can get into the goods. With this in mind, clean room flooring is necessary so that it plucks dirt etc off shoes that are being worn so that it does not get into the place. One product, called Dycem, is probably the best known product which actually cleans wheels and shoes as they pass over it. Although this is a good start, this is really not enough to finish the work so some other precautions must be taken too.

This product has a very soft and supple exterior that pushes its way right into the cracks and crevices in the shoes etc this means then that the corridor or hallway must be long enough to allow for the covering to do its work while the wheels or shoes are traversing this area. Since these places are about ten thousand times cleaner than even the cleanest of rooms it proves that the product is doing what it should.

The anti bacterial qualities are made up of a silver base. It has a broad spectrum which kills most bugs that it comes across. People often complain that these corridors look a little dirty in between washes but this indeed shows that the surface is doing exactly what it is supposed to be doing. For certain, contamination of these areas will usually come from the floor level and through any doors and openings. Having this wonderful material in place then will actually hold back any infections and bacteria right in this first line of defense.

There are some areas in factories and hospitals where the surroundings should be absolutely pristine. Computer oriented businesses etc have to have an extremely clean atmosphere since any dust will touch the surface of the silicone and spoil it completely. If the areas are not exactly clean some of the goods produced may have to be discarded if anything is on them.

This could also be applied to those places where there is food being produced too. Of course, it goes without saying that anywhere where there are patients who are undergoing medical treatment will also have to have a level of cleanliness to if infections are not to hit. Keeping cross infection from affecting patients is a full-time job for most hospitals and the cases that hit the headlines will testify that they are not always successful in this instance.

Although hospitals do their best to keep bacteria away from the patients, sometimes the inevitable happens and a patient may lose a limb or even his life if the infection is not fought hard enough.

After the relevant company has put down this kind of flooring, they will keep checking on surface to make sure that it is behaving in the way that it should. They usually graph results so that the client has a visual record of how the surface is behaving and this then makes the client feel confident that the materials being used are working right.

Article Source: http://EzineArticles.com/?expert=Stewart_Wrighter

Thursday, December 2, 2010

Wood flooring installation


This short video shows how to install solid wood flooring onto a concrete base using Rewmar MS Polymer flexible adhesive. This adhesive is so easy to use and contains no solvents. Perfect for sticking down both solid hardwood flooring and engineered hardwood flooring.